Supernova Midi ports? - Synths & synthesis forums

Forums - Synths & synthesis

Subject: Supernova Midi ports?

Viewing all 7 messages - View by pages of 10: 1

Original Message 1/7 19-Dec-03 @ 11:19 PM Edit: 19-Dec-03 | 11:20 PM - Supernova Midi ports?

BluStudio

Posts: 1011

Link?: Link

File?: No file

how easy to replace?

Can i buy them? if not, is it something easily done buy a uk company?

Im getting intermitent faults thru this IN port - sometimes jamming, sometimes just not recieving till ya give the cable a shake at the port, almost like its got a dodgy connection somewhere ( tried a million diff cables)

i blasted a hair dryer thru the port and it seemed to play perefectly for a while, now just not recieving nuthin again

can anyone help? Nick@Novation?

blu

[ back to forum ] [quote]

Message 2/7 19-Dec-03 @ 11:44 PM - RE: Supernova Midi ports?

Tom

Posts:

Link?: No link

File?: No file

It sounds like the solder joint on the PCB board might be loose. Take a soldering iron and reheat the solder joints for the midi connector.

Tom

[ back to forum ] [quote]

Message 3/7 19-Jan-04 @ 01:53 PM - RE: Supernova Midi ports?

Broken Silence

Posts: 1071

Link?: Link

File?: No file

I'd email novation. I had a problem with my outputs on the nova and they sent me- free of charge- 4 more. And that was stateside delivery- still didnt have to pay anything. AND on top of that, they knew that it was second hand.

Amazing customer support...

[ back to forum ] [quote]

Message 4/7 07-Feb-04 @ 10:10 AM - RE: Supernova Midi ports?

bastiaan

Posts: 1309

Link?: Link

File?: No file

Smae here:they sent me replacement keys for my Bstation which was 2nd (or 3rd?) hand....never have i expereienced such great support. (and the Bstation is a gem btw)

IT seems Novation are a bit cheap though with applying solder....a lot of their products need some resoldering...(nova knobs, drustation etc...)

[ back to forum ] [quote]

Message 5/7 07-Feb-04 @ 10:57 AM - RE: Supernova Midi ports?

psylichon

Posts: 4573

Link?: Link

File?: No file

is that why my data encoders suck and need to "warm up"?

[ back to forum ] [quote]

Message 6/7 07-Feb-04 @ 12:16 PM - RE: Supernova Midi ports?

BluStudio

Posts: 1011

Link?: Link

File?: No file

yeah, i took it to my local synth shop and they ran some new solder across the Midi ports, seems fine now!

blu

[ back to forum ] [quote]

Message 7/7 11-Feb-04 @ 06:00 PM - RE: Supernova Midi ports?

Nick Bookman

Posts:

Link?: No link

File?: No file

Hi All,

this is not that common, honest! Keep an eye on the MIDI socket, if it needs to be replaced contact our UK authorised repair centre, Panic Music on 01223 873073.

Best regards,

Nick.

[ back to forum ] [quote]

Viewing all 7 messages - View by pages of 10: 1

There are 7 total messages for this topic

Reply to Thread

You need to register/login to use the forum.

Click here to Signup or Login !

[you'll be brought right back to this point after signing up]

Back to Forum