 |
 |
 |
 |
 |
 |
 |
Forums - Mixing & FX
Subject: RAMSA_DA7
Viewing all 3 messages - View by pages of 10: 1
Original Message 1/3 10-Apr-08 @ 02:22 PM - RAMSA_DA7 [Link: RAMSA - DA7]
Message 2/3 28-Apr-08 @ 12:45 PM - RE: RAMSA_DA7
admin
Posts: 11382
Link?: No link
File?: No file
* 16 balanced XLR and 1/4" TRS Mic/line analog inputs
* 16 analog inserts (pre A/D)
* AES/S/PDIF (2 Ch.) digital I/O, Word Clock In/Out, MIDI, IN/OUT, MIDI Machine Control (MMC) RS-422/485, are standard
* Optional ADAT lightpipe, TASCAM/TDIF, AES-EBU-SPDIF and analog AD-DA 8-Channel
___________________________________
"In other countries, art and literature are left to a lot of shabby bums living in attics and feeding on booze and spaghetti, but in America the successful writer or picture-painter is indistinguishable from any other decent business man!" - Babbit
Message 3/3 21-Mar-11 @ 09:09 AM - RE: RAMSA_DA7
Man, you'll need an interface card or Unit to use, either FW400/800 or USB, then lock through W/clock/Adat sync or lightpipe - TDIF is a Parallel format, thus it takes much more fuss to connect, serial protocols like LightPipe will go 8 in/out x 2 giving you 24 In/Out on RME units and MOTU with true 24 bit/48Khz @ at a great speed.
Bus x 8 out from the Ramsa at a time (Or go Direct Line In, making Stems or Tracks (Individual) of Drums/Vox/Beats etc, and you'll chew up less CPU as you've got Hardware. The DA7 is still a nice little Digital console! Power to you *****
Grab A DAW program, and away you go man! You are........Recording!
Hope this helps!
Viewing all 3 messages - View by pages of 10: 1
There are 3 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
