Forums - Mixing & FX
Subject: phasin' hell- im outta my depth.....
Original Message 1/19 14-Mar-05 @ 09:57 AM - phasin' hell- im outta my depth.....
i'm currently having a phasing issue i need to correct- my drums and bass are all going into a subgroup- with that subgroup going out as mono into a filter/eq/comp and back into a channel on my mixer filtered to buggery- now all is good when the channel is played on its own or when the original is played on its own but obviously when they mix i get phasing issues at certain frequencies, im not playing the two at the same volume- the filtered version sits under the main- so im thinking the only way to correct this is change the phase of the mono lead coming outta the group and feeding the filter- but i dontr how to change the phase- is it case of swapping the two internal wires over at one side of the lead- as you can see im outta my depth but want to know how to solve this...
recap
HARDWARE- stereo signal->subgroup->mono out->filter->back into channel of mixer= huge phase- help!
Greg
Message 2/19 14-Mar-05 @ 01:14 PM - RE: phasin' hell- im outta my depth.....
also sending thru that chain and back is probably adding a Millisecond or two delay to that signal, hence the phasing when added to the original - why are you adding it back to original, wouldnt it be better to just use filtered signal only for that effect?
___________________________________
I had an idea for a script once. It's basically Jaws except when the guys in the boat are going after Jaws, they look around and there's an even bigger Jaws. The guys have to team up with Jaws to get Bigger Jaws.... I call it... Big Jaws!!!
Message 3/19 14-Mar-05 @ 01:25 PM - RE: phasin' hell- im outta my depth.....
the reason im tying to do this is that at some points i want the meat of the groove there with its highs and lows but with some quick sweeps across the mids with resonance- why? it sounded pretty cool despite the phasing....also at another point everything but the bass stops going through the filter which again needs to be layered over the original bass so i can realtime tweak it...
i could just not use it that way but i was sure i could get round this somehow...
greg
Message 4/19 14-Mar-05 @ 03:28 PM - RE: phasin' hell- im outta my depth.....
Message 5/19 14-Mar-05 @ 03:48 PM - RE: phasin' hell- im outta my depth.....
thanks anyways...
greg
Message 6/19 14-Mar-05 @ 04:00 PM - RE: phasin' hell- im outta my depth.....
Message 7/19 14-Mar-05 @ 04:06 PM - RE: phasin' hell- im outta my depth.....
inverted mono version of stereo loop mixed with stereo loop at -3db- will this phase?
greg
Message 8/19 14-Mar-05 @ 04:23 PM - RE: phasin' hell- im outta my depth.....
Message 9/19 14-Mar-05 @ 04:28 PM - RE: phasin' hell- im outta my depth.....
greg
Message 10/19 14-Mar-05 @ 05:58 PM - RE: phasin' hell- im outta my depth.....
building a phase reverse cable aint all that complicated. just take a ballanced cable and re-wire the 2 pins on one side.
the perfect solution would be to record the dry and wet signals separately into the pc and line them up in a sequencer... but if you aint using one then you're stuck i'm afraid :/
regards, m.
Pages: 1 2
There are 19 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum