Forums - Music techology
Subject: Levels and all that...
Original Message Date: 30-Sep-06 @ 06:53 PM - Levels and all that...
I'm in the process of a command module overhaul and would like to get
everything to work at it's best possible.
Here's my set-up:
pentium II 350 Mhz running Cubase vst/32 5, Delta 66
Phonic Mixer with 4 buss.
Each buss is sent to one of the 1/4 inch input of the Delta.
Delta out 1 & 2 are are respectively taking Chanel 15 and 16
of the Phonic mixer routed to main wich feeds a pair of Alesis
M1 Active.
I don't want to use the Phonic for mixing, once in the box, the
signal will stay there.
So the question is: How should i set up in the Delta Control panel ?
+4, consumer, -10 ? both for output and input
Running at +4 all the way, i find that recorded signal, once played back
is extremely low, barely moves the channel meter, even if it danced in the
yellow while inputing, is this normal ? Do i need to raise the material prior
to mixing or monitor louder ?
thanks for any tips
Message 11/11 03-Oct-06 @ 10:12 AM - RE: Levels and all that...
As a result, my ITB mixes do not sound ITB, if I may be so bold
___________________________________
I had an idea for a script once. It's basically Jaws except when the guys in the boat are going after Jaws, they look around and there's an even bigger Jaws. The guys have to team up with Jaws to get Bigger Jaws.... I call it... Big Jaws!!!
Pages: 1 2
There are 11 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum