Forums - Computer music & technology
Subject: Reaktor more synths at the same time
Original Message Date: 24-Aug-00 @ 08:26 AM - Reaktor & synths at the same time?
My question is: How to use different synths (on other miditracks) of Reaktor VST in cubase VST at the same time?
thanx in advance
Message 11/14 29-Aug-00 @ 10:57 AM - RE: Reaktor more synths at the same time
Each reaktor instance takes 15% proc time on a AMD Duron 650 @ 735...
That doesn't disappoints me
Message 12/14 29-Aug-00 @ 05:04 PM - RE: Reaktor more synths at the same time
Message 13/14 30-Aug-00 @ 03:17 AM - RE: Reaktor more synths at the same time
So maybe you can make it 7 x 120 mhz ( = 840 mhz). But successfully overclocking depends on which mother board you have and the memory. If you have good 100 mhz memery, it can handle 120 mhz FSB, if not you're system won't run stable (lock-ups, blue screens, etc.), avarage 100 mhz memory can handle 112 mhz. But it would be nice when you use 133 mhz memory, then it's no problem to push the FSB.
I hope that you're motherboard has a variaty of FSB settings. There are some motherboard which can run only at 66, 100 and 133 mhz FSB.
There's a solution for a unstable system... push the voltage of the processor higher, for example from 1,65 to 1,70, or higher. This does not work always, centainly not when you memory can't handly the higher FSB speed. However some motherboard do have voltage or FSB settings
The FSB and Voltage settings should you find in the Bios or on the motherbaord (with dipswitches and/of jumpers), that depends on which motherboard you got.
Just take you're motherboard manual, there is explained where you can find the setting.
Succes
Message 14/14 30-Aug-00 @ 03:33 AM - RE: Reaktor more synths at the same time
Pages: 1 2
There are 14 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum