 |
 |
 |
 |
 |
 |
 |
Forums - Samplers & sampling
Subject: Sample Midi Channel (MPC 2000XL)
Viewing all 2 messages - View by pages of 10: 1
Original Message 1/2 26-Nov-99 @ 01:28 AM - Sample Midi Channel (MPC 2000XL)
anybody know how to assign specific samples to specific midi channels (ie. pad one ch.1 pad 2 ch.2 etc?) can you help me out?
Peaceout
Peter
Peaceout
Peter
Message 2/2 28-Nov-99 @ 02:23 AM - RE: Sample Midi Channel (MPC 2000XL)
Umm....
What Exactly are you trying to do?
Do you want the samples to be triggered by an external sequencer? If so....
WHY?? Half the point of the MPC is that it is a sequencer?
If you're just trying to trigger external sounds using individual pads, well...
You have to pick a track, assign the track to "drum" rather than "midi" mode and set the midi channel (i.e. 01 device01 or whatever it says) to whatever channel you want. Then the pads will play the external instrument chromatically depending on which pad you hit. (note: pads are automatically arranged in crazy-whack mode where the pads have no spatial relation to pitch) ....
anyway...
What Exactly are you trying to do?
Do you want the samples to be triggered by an external sequencer? If so....
WHY?? Half the point of the MPC is that it is a sequencer?
If you're just trying to trigger external sounds using individual pads, well...
You have to pick a track, assign the track to "drum" rather than "midi" mode and set the midi channel (i.e. 01 device01 or whatever it says) to whatever channel you want. Then the pads will play the external instrument chromatically depending on which pad you hit. (note: pads are automatically arranged in crazy-whack mode where the pads have no spatial relation to pitch) ....
anyway...
Viewing all 2 messages - View by pages of 10: 1
There are 2 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
