ESI4000 - finishing samples... - Samplers & sampling forums

Forums - Samplers & sampling

Subject: ESI4000 - finishing samples...

Viewing all 5 messages - View by pages of 10: 1

Original Message 1/5 03-Mar-00 @ 11:10 PM - ESI4000 - finishing samples...

Defector_Z

Posts:

Link?: No link

File?: No file

Hey, how do you get the ESI to play the full sample without holding the key down for the duration of that sample?

[ back to forum ] [quote]

Message 2/5 04-Mar-00 @ 04:38 PM - RE: ESI4000 - finishing samples...

damballah

Posts: 1675

Link?: Link

File?: No file

There should be a place where you can set the envelope to go through its whole cycle regardless of how long the key is held: these are usually used for setting up drum kits. Don't know for sure on the ESI, but that's the way my old dead EPS worked.

[ back to forum ] [quote]

Message 3/5 05-Mar-00 @ 09:15 AM - RE: ESI4000 - finishing samples...

ivan

Posts:

Link?: No link

File?: No file

Go to trigger mode for the zone and set it to "gate" (I think). This reduces the envelope to AHR, so just set the hold time to your sample's length. You can do this with the regular envelopes as well, setting the hold time as above.

[ back to forum ] [quote]

Message 4/5 06-Mar-00 @ 07:12 AM - RE: ESI4000 - finishing samples...

lyrebird

Posts:

Link?: No link

File?: No file

or set a very long release time

[ back to forum ] [quote]

Message 5/5 08-Mar-00 @ 08:45 AM - RE: ESI4000 - finishing samples...

Defector_Z

Posts:

Link?: No link

File?: No file

Cool, thanks, I'll give that a shot and let you know.

[ back to forum ] [quote]

Viewing all 5 messages - View by pages of 10: 1

There are 5 total messages for this topic

Reply to Thread

You need to register/login to use the forum.

Click here to Signup or Login !

[you'll be brought right back to this point after signing up]

Back to Forum