 |
 |
 |
 |
 |
 |
 |
Forums - Samplers & sampling
Subject: E6400 Sequencer Questions
Viewing all 4 messages - View by pages of 10: 1
Original Message 1/4 27-Aug-00 @ 01:12 PM - E6400 Sequencer Questions
Greetings,
I am looking at purchasing an Emu E6400 Ultra sampler. I had a few questions about the sequencer:
1. Is it possible to direct one of the 48 tracks to an external MIDI unit only? (and not sound internally?) Also, can you have two tracks with the same MIDI channel but one routed to internal sounds and the other routed to external MIDI synths?
2. Does the sampler work in multi mode while it's playing a sequence? For example, could I hook up a controller and play a sequence back while playing live samples over it?
Thanks!
Dan Wellman
I am looking at purchasing an Emu E6400 Ultra sampler. I had a few questions about the sequencer:
1. Is it possible to direct one of the 48 tracks to an external MIDI unit only? (and not sound internally?) Also, can you have two tracks with the same MIDI channel but one routed to internal sounds and the other routed to external MIDI synths?
2. Does the sampler work in multi mode while it's playing a sequence? For example, could I hook up a controller and play a sequence back while playing live samples over it?
Thanks!
Dan Wellman
Message 2/4 31-Aug-00 @ 10:33 PM - RE: E6400 Sequencer Questions
you can not use the sequencer on external sounds...as far as I know
and YES, it does multimode. quite easy actually.
thing is..the sequencer on these samplers is NOT a good one. its a scratch pad. not for composing really..
but..if you recorded a sequence say in ch1, then wanted to play over on ch2 or....then, sure...you can do that
and YES, it does multimode. quite easy actually.
thing is..the sequencer on these samplers is NOT a good one. its a scratch pad. not for composing really..
but..if you recorded a sequence say in ch1, then wanted to play over on ch2 or....then, sure...you can do that
Message 3/4 08-Sep-00 @ 05:55 AM - RE: E6400 Sequencer Questions
Actually, I'm pretty sure you can drive sequencer data out the MIDI port on the back.
Haven't tried it yet since I use an MC-80 for hardware sequencing, but I know a few bands using the EmaxII who do this. It's be daft if the new machines didn't
Haven't tried it yet since I use an MC-80 for hardware sequencing, but I know a few bands using the EmaxII who do this. It's be daft if the new machines didn't
Message 4/4 20-Sep-00 @ 02:30 PM - RE: E6400 Sequencer Questions
It's all moot. Don't try to use the sequencer; it's worthless, even though the e6400 is an incredible sampler. If you have a track playing in the e6400 sequencer, it will be sent out the midi out, nothing you can do about it. This confounded me too.
Viewing all 4 messages - View by pages of 10: 1
There are 4 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
