Forums - Samplers & sampling
Subject: Paralell transfer FZ/PC
Viewing all 4 messages - View by pages of 10: 1
Original Message 1/4 01-Sep-98 @ 12:43 PM - Paralell transfer FZ/PC
a paralell cable.
Then I will be able to transfer samples to and from Awave.
Is this a standard cable ? Or do i have to solder one myself ?
Schematics anyone ????
Message 2/4 02-Sep-98 @ 07:27 AM - RE: Paralell transfer FZ/PC
You'll need to build the cable, but not really all that
hard- just go slowly and double check everything before connecting it up.
The FZ-Dump Cable only works with the DOS version of Jef McClintock's FZ-Dump. If you download the DOS version from his nice site (http://users.iconz.co.nz/jeffm/fzdump.htm) it will come with a schematic to build it.
Good luck, Mike
Message 4/4 12-Sep-98 @ 08:10 AM - RE: Paralell transfer FZ/PC
Your very welcome!
Good luck, Mike
Viewing all 4 messages - View by pages of 10: 1
There are 4 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum