 |
 |
 |
 |
 |
 |
 |
Forums - Computer music & technology
Subject: VST Multiple Outs
Viewing all 2 messages - View by pages of 10: 1
Original Message 1/2 31-Jul-98 @ 11:13 PM - VST Multiple Outs
Rouge
Posts: 2
Link?: No link
File?: No file
I've got 2 soundcards in my system so how do I go about routing the Audio channels to seperate soundcard outputs so I can externally mix them?
The master output tends to define the final output - can I switch this off?
The master output tends to define the final output - can I switch this off?
Message 2/2 01-Aug-98 @ 12:08 AM - RE: VST Multiple Outs
set the VST tracks to ANY.....
then when the master mixer is opened, you'll see the master.... and the BUS out which is your second card or outputs..... there can be 4 buss stereo outs....... or 8 mono using pan on the monitor channels.... so... at the bottom of the input channels if the bus is set active in the master mixer, then you can select a bus out for the monitor channels... that i reckon is it..... i cant test it, cos i used a dummy second audio device... but it seems correct... try it....
then when the master mixer is opened, you'll see the master.... and the BUS out which is your second card or outputs..... there can be 4 buss stereo outs....... or 8 mono using pan on the monitor channels.... so... at the bottom of the input channels if the bus is set active in the master mixer, then you can select a bus out for the monitor channels... that i reckon is it..... i cant test it, cos i used a dummy second audio device... but it seems correct... try it....
Viewing all 2 messages - View by pages of 10: 1
There are 2 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
