Forums - Mixing & FX
Subject: SECK 122 mk II Mixer
Viewing all 9 messages - View by pages of 10: 1
Original Message 1/9 15-Nov-99 @ 08:36 PM - SECK 122 mk II Mixer
aparentley its all going wrong in that it gives off noise and distortion because the levels don't match with modern gear and this fairly modern mixer.
it gives out +4 db where as my amp accepts -10db ,
you can get a box to sort this out , but i need to check it out in a manual or something.
mackie mixers for instance i have been told get away with having a 0db output .
this is all new to me so if you know anyone with a seck 122 mk II or similar get in touch
Message 2/9 21-Nov-99 @ 10:15 PM - RE: SECK 122 mk II Mixer
dunno 'bout this line level thing on the 12-2 outs tho?.... If it IS so, your amp aint going to blow up exactly, but... to sort out the matchin (impedence is more important for your amp), just get the mixer and amp down to any local tech bloke with a workshop, like the local TV repair etc - and he'll measure up the SECK outs and amp IN's, and get him to wire a resistor into each of the SECK L/R out jack-Plugs that go to the amp - that should do it -
actually tho, you want to use the MONITOR L/R out to go to your amp, and the MASTER L/R to your DAT or PC card L/R input -
anyways - the local tech bloke will do it - use your local traders -
tell me the name/Labels of all the master-section IN-OUTS on your desk... and the connector types IF they are NOT 1/4 inch jacks (i thought all the seck connectors were 1/4" jacks)
Message 3/9 22-Nov-99 @ 09:48 AM - RE: SECK 122 mk II Mixer
How come mine is a 12-8-2 first, it does have 12 channels mind you, but its model name is... mnodel 122 mk II
It does have gray/cream and blue & white knobs you are right.
<
It has a 1/4" jack line input & a insert on each channel, and also xlr mic inputs.
The master output has a blanced L & R xlr output, and also a mono 1/4" jack output.
<
What do you mean monitor outputs , do you mean headphone sockets ??, there is only one output section ,wich i described above.
I was a bit confused before i posted my first message, I didn't realise that each channel doesn't nead to have the led's on the VU just below the red stage . I understand now that i should have each channel at about -10db to
-6db at the gain, so that when they all combine i should have the led's just below the reds overall.
I am not to botherd about my amp, and blowing it up, i was primarily concerned about the level of noise i get with my mixer, its not an earth problem anyway.
Here is a message i recieved from a freind in the first place...
the output of the seck is +4 balanced, and it's likely that whatever gear
your interfacing with the output of it is -10 unbalanced....so you have a
mismatch of about 14 db or so, maybe more. this happened to me when i was
using it, i got a -10/+4 level converter box and it made everything fine.
a level converter costs around $50-100 for a decent one that does 2 channels
of -10 to +4 (step up) and 2 channels of +4 to -10 (step down). i don't know
for sure if you need one, so research it.
>if you have a mixture of balanced
and unbalanced stuff, you're almost guaranteed to have a problem .
Thats another thing,,,, does the seck 122 mk II have TRS(stereo) inputs , or mono ??
Thankyou for your reply M8, and i think i will check with my local T.V dealer, good peice of info,
thanks
Dan
Message 4/9 22-Nov-99 @ 03:56 PM - RE: SECK 122 mk II Mixer
Message 5/9 22-Nov-99 @ 06:01 PM - RE: SECK 122 mk II Mixer
The mixer has 4 aux sends on each channel, 2 pre's and 2 others,
What is the 12-8-2 thing, the model is a seck 122 mk II
Message 6/9 22-Nov-99 @ 06:17 PM - RE: SECK 122 mk II Mixer
i had copyied a bit from your message and it looked like i was saying i had a 12-8-2 or a 18-8-2 , whatever they are?
i will probrably confuse again on the one just above this
, because i have wrote
"sorry the mixer has 4 aux sends.... " there should have been a coma there after the word sorry.
SORRY
Message 7/9 23-Nov-99 @ 12:34 AM - RE: SECK 122 mk II Mixer
Message 8/9 16-Dec-99 @ 04:27 AM - RE: SECK 122 mk II Mixer
Our church has a SECK 122 mixer, used to handle the PA system.
Some years ago we replaced all the channel faders - they were
getting too noisy after much use. The kit has now developed a
serious fault on two channels - full gain all the time - and an
intermitten fault (sounds like "frying tonight") on the master right-
channel output.
We URGENTLY need the mixer fixed - or replaced with similar -
in time for Christmas services.
Does anyone know if SECK/Bandive still exist? Address and phone
number? Or, local (Southampton area) tech shop that might effect
an urgent repair?
The SECK 122 booklet quotes address Brent View Road, London
NW9, and phone 01-202 4155 - obviously no longer true.
Many thanks in advance..
John Bland.
P.S. Apologies if this is abuse of the chat room - I'm desperate!
Message 9/9 17-Dec-99 @ 02:47 PM - RE: SECK 122 mk II Mixer
Viewing all 9 messages - View by pages of 10: 1
There are 9 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum