Forums - Mixing & FX
Subject: 01V and/or Delta 1010 ?
Viewing all 10 messages - View by pages of 10: 1
Original Message 1/10 26-Jul-00 @ 07:01 AM - 01V and/or Delta 1010 ?
Reading a bit about the Midiman Delta 1010 and the Yamaha 01V, I'm getting quite a bit confused about what to do.
I'm pretty sure I want the knobs and sliders on the 01V to adjust various parameters, rather than the PC GUI needed to control the 1010 mixer. Also, I think I want the built-in effects of the 01V.
But obviously, some sort of hardware is required in the PC in order to record the outputs from the 01V.
Would it make any sense to have both the 1010 and the 01V ? Could the 01V outputs be routed to the 1010 without quality loss ?
Or would it be a better idea to get some other sort of interface for the PC, and then add another 01V (or 1010) later if I need more inputs ?
Message 2/10 26-Jul-00 @ 09:29 AM - RE: 01V and/or Delta 1010 ?
-Craig
Message 3/10 28-Jul-00 @ 06:31 AM - RE: 01V and/or Delta 1010 ?
Which ADAT card should I get for the PC ?
Message 4/10 28-Jul-00 @ 07:00 PM - RE: 01V and/or Delta 1010 ?
Message 5/10 28-Jul-00 @ 07:03 PM - RE: 01V and/or Delta 1010 ?
Message 6/10 28-Jul-00 @ 09:13 PM - RE: 01V and/or Delta 1010 ?
Message 7/10 31-Jul-00 @ 04:53 AM - RE: 01V and/or Delta 1010 ?
I assume the DIGI9652 - Project Hammerfall - is the best choice here ?
Message 8/10 24-Aug-00 @ 09:42 AM - RE: 01V and/or Delta 1010 ?
I take the SPDIF signal from my 01v directly into my SB Live.
Depends if you *really* want to mix grouped outputs from the 01v within the PC. I do all my mixing on the 01v.
Message 9/10 24-Aug-00 @ 10:53 AM - RE: 01V and/or Delta 1010 ?
But maybe having 8 ins and 8 outs is more flexible ?
I could record 8 voices at a time, storing the 'unprocessed' waves in the computer, and then route them back to the 01v later and add dynamics, EQ & FX, and then record those outputs 8 at a time ?
Is this a good idea, and would everything stay digital at all times ? I mean, is the ADAT protocol safe so that you don't lose data when sending stuff back and forth between the computer and the 01v ?
BTW, I already got the 01v and UPS is supposed to show up with the Project Hammerfall and some other goodies pretty soon.
Message 10/10 30-Aug-00 @ 05:10 AM - RE: 01V and/or Delta 1010 ?
I start with that in mind then mix production tracks afterwards.
That's why I only use the stereo digital output from the 01v...
Viewing all 10 messages - View by pages of 10: 1
There are 10 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum