Forums - Mixing & FX
Subject: Using VF-1 in parallel mode
Viewing all 3 messages - View by pages of 10: 1
Original Message 1/3 21-Oct-00 @ 02:28 AM - Using VF-1 in parallel mode
Message 2/3 22-Oct-00 @ 01:24 PM - RE: Using VF-1 in parallel mode
Take b33 as an example (Hall/Room) - if you inot the 1st edit page it shows the 2 different verbs in a parallel configuration so you`ll have a hall verb on one of the send and a room on the other. There are other with like a simple delay on one and verb on ther other but you dont get too much control as to what efx you have on each send due to dsp limitations I guess. It sucks, I know.
Message 3/3 23-Oct-00 @ 03:57 PM - RE: Using VF-1 in parallel mode
most are like "Wave Chorus", "Stereo Phaser", stuff like that but a few
say like "Hall + Room", "Rev + Chorus", "Rev + Delay", etc.
the first is the left effect, the second is the right effect, i think they are mono
so the outputs are the same, and you can run them in series with an option too.
if you have the se70's 2 channel mixer on the vf-1, it is a little more flexible, but a little harder to get your head in....2 channels, separate eq + noise reduction each channel, then a delay -> chorus -> reverb, but with separate send levels for each input. weird, i haven't used it much, but maybe there's something like that you could use....
Viewing all 3 messages - View by pages of 10: 1
There are 3 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum