Forums - Mixing & FX
Subject: Controlling VF-1 parameters via MIDI notes
Viewing all 1 messages - View by pages of 10: 1
Original Message 1/1 27-Oct-00 @ 07:59 AM - Controlling VF-1 parameters via MIDI notes
If I read the VF manual correctly, it said that the VF does not respond to note-on messages, only to continuous controllers.
So I created a patch on my Trinity at 100% filter keyboard tracking. The Triton manual said that the CC# that the Triton would send in conjunction with the filter cutoff is 74. So I set the VF's mod destination to flanger depth, and I set the source to MIDI-74.
Theoretically when I play the keys, the filter will open exactly in tune with the keyboard, and the opening filter will send out CC#74 and the VF should receive it and change the depth level corresponding to the key I play... right?
It still didn't work though.
Any ideas anybody?
Viewing all 1 messages - View by pages of 10: 1
There are 1 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum