 |
 |
 |
 |
 |
 |
 |
Forums - Samplers & sampling
Subject: < nova and RM1X >
Viewing all 4 messages - View by pages of 10: 1
Original Message 1/4 28-Nov-00 @ 03:16 AM - < nova and RM1X >
i am having problems when trying to get more than one midi channel from the nova to play back on my rm1x. when i sequence a track on the rm1x using nova sound, midi channel 1 always plays back fine. (nova is set to midi channel 1; rm1x 'to TG' settings for midi channel 1 are off; and i am using PC data to call up the right patch from nova...)however, when i try to sequence anything using nova sound on to any other midi channel (with all above settings in effect, according to midi channel), the nova will not play back through the rm1x. sound confusing? it certainly is! (well, to me anyways.) i'm sure i'm just overlooking something, but any suggestions as to how i can get the full 12 voices out of this powerhouse would be WAY appreciated! thanks, peace, liquidkid
Message 3/4 28-Nov-00 @ 03:19 AM - RE: < nova and RM1X >
i'm not entirely sure. . .that's another thing - record sysex data to what track, and do what with it on the rm1x? sysex confuses me. . .
Message 4/4 01-Dec-00 @ 09:09 PM - RE: < nova and RM1X >
If you've got the out channels on the
RM1X set right (ie sound 1 on channel 1,
sound 2 on channel 2), then your problem
is with the Nova. I don't know all that
much about them, but make sure you're in
multi mode and have your multi setup
properly.
-Craig
RM1X set right (ie sound 1 on channel 1,
sound 2 on channel 2), then your problem
is with the Nova. I don't know all that
much about them, but make sure you're in
multi mode and have your multi setup
properly.
-Craig
Viewing all 4 messages - View by pages of 10: 1
There are 4 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
