Forums - Synths & synthesis
Subject: Bought a Novation Supernova 2
Viewing all 12 messages - View by pages of 10: 1 2
Original Message 1/12 27-Sep-01 @ 06:02 AM Edit: 27-Sep-01 | 06:03 AM - Bought a Novation Supernova 2
These are the settings I used on the synth:
Selected a program (one timbre only) -
Arpeggiator is off -
Global MIDI channel set to 1 -
Sysex transmission set to total data request -
Sysex reception set to normal (Rx as sent) -
MIDI clock external -
Local control set to on (also tried it when set to off, but makes no difference) -
Memory protect set to off -
Incoming control change set to enabled -
Incoming program change set to enabled -
Program change Tx set to on -
Finder demos set to off -
Sysex Tx delay set to 70ms -
Temp disp time set to 110
Running Cubase 5.0r3 with Windows 2000. The MIDI cables are in my gameport. There's also something strange going on which I'dd like to note. In Cubase I go to Options > MIDI setup > System and set MIDI Input, MIDI Output and those 2 "mapped to" parameters to VIA MIDI External Port. If I go back again the MIDI Output and it's "mapped to" parameter are set back on "Microsoft GS Wavetable". Also I have only a onboard soundcard and I am going to buy a new soundcard when it's pay day, but I don't think that has got to do with my problem, right? Anyway many thanks for helping me!
Message 2/12 27-Sep-01 @ 07:01 AM - RE: Bought a Novation Supernova 2
[image file]
dude, If I were you, I would get a hardware
sequencer and learn from that...
You know that it works, and you'll know wether
your synth is on crack.
THis is prolly bad advice, but it avoids all the
computer tech shit.
check the Roland MC-500 / MC-50, Kawai q
80, and the Alesis MMt-8.
Message 3/12 27-Sep-01 @ 12:37 PM - RE: Bought a Novation Supernova 2
Message 4/12 27-Sep-01 @ 05:11 PM - RE: Bought a Novation Supernova 2
Message 5/12 28-Sep-01 @ 10:42 AM - RE: Bought a Novation Supernova 2
far easier to set up for music
Message 6/12 28-Sep-01 @ 11:58 AM - RE: Bought a Novation Supernova 2
When I was trying to sort some problems I had with a dodgy controller keyboard a few months back Dr, I was told to DL a program called "MidiOx" - do a search for it and it`ll help you to follow the path of midi data and see exactly where things are going arse up.
Message 7/12 28-Sep-01 @ 03:28 PM - RE: Bought a Novation Supernova 2
Message 8/12 28-Sep-01 @ 05:01 PM - RE: Bought a Novation Supernova 2
Message 9/12 28-Sep-01 @ 05:36 PM - RE: Bought a Novation Supernova 2
It would be helpful to know if the problem is related with your PC or the SN first.
btw: The mapping page in Cubase (Options/Midi/System) should be reset to make sure that no midi In/Out is mapped to a different port.
Regards
Stefan
Message 10/12 28-Sep-01 @ 07:47 PM - RE: Bought a Novation Supernova 2
This often doesn't work in Cubase. Took me ages to figure it out.
Try recording notes in real-time from your supernova keyboard. Then play them back. See if that works. You can always tidy them up later.
Message 11/12 28-Sep-01 @ 10:01 PM - RE: Bought a Novation Supernova 2
Message 12/12 28-Sep-01 @ 10:52 PM - RE: Bought a Novation Supernova 2
It is best to choose "Refresh Map" (I have a german version, therefore I don't know if it's exactly that expression)in Options/Midi/System. In the same menue you should check if the VIA Midi In is active.
In addition you should make sure that no box in Options/Midi/Filter is checked.
If you cannot choose the VIA Midi Out as Track Output in the arrange window, there might be problems with the card driver.
There is a program named SetupMME in the Cubase folder. If you run this program you can see, which Midi Ins and Outs are available.
Please check if the midi volume isn't set to zero in the inspector window or midi track mixer. Make sure that no remote control (Options/Remote Settings) is active.
You might exchange the midi cables...
Well, enough for tonight ;-)
Hope this helps
Regards
Stefan
Viewing all 12 messages - View by pages of 10: 1 2
There are 12 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum