Forums - Music techology
Subject: BCF 2000 Adn BCR2000 trouble
Viewing all 2 messages - View by pages of 10: 1
Original Message 1/2 23-Aug-06 @ 04:55 PM - BCF 2000 Adn BCR2000 trouble [Link: Behringer - BCF 2000]
The BFC is assigned at the midi page controlling the mixe and the BCR (i know it must be wrong)assigned at the mackie control page.
Result:I can use the BCF but the BCR don't play ball.
helping hand?
Message 2/2 23-Aug-06 @ 05:37 PM - RE: BCF 2000 Adn BCR2000 trouble
HERe's our mails working bottom to top... it was a while back, but there is 2 links provided to detaisl page for cascading and you can see settings for each item (BCF set to U-4
- BCR set to S-4)
I did get it working in Logic anyways, sx i don't think i tried it, but should be ok
-----------------------------
Hi,
yes we tested it with TWO BCFs and it works perfect!
(Apart from this it doesn´t matter if you use a BCF or BCR, the global modes
are identically.)
Please check your routing/global mode settings, wiring (any cable damaged?)
and also your sequencer settings again, and please read the manual
description concerning usage of more than 1 unit.
Best regards,
Bert Niedermeyer
-----Original Message-----
From: dancetech [mailto:admin@dancetech.com]
Sent: Thursday, November 25, 2004 5:13 PM
To: Niedermeyer, Bert
Subject: Re: BCF2000 Review
well, oddly it seems to work with one BCF, but not with 2 -
using 2 X BCF, i get midi OUT from the sequencer TO the BCR, but not the
other way round - cant get data FROM the BCR to the sequencer
have you guys treid it with 2 X BCF?
??
Team Dancetech
London
--------------------------------------
www.dancetech.com
www.7161.com
--------------------------------------
FREE music-space & artist/band homepages for all
--------------------------------------
www.dancetech.com/aa_dt_new/start/about_dancetech.cfm
----------------------------------------------------------------------------
-------------------
----- Original Message -----
From: "Niedermeyer, Bert"
To: "'dancetech'"
Sent: Thursday, November 25, 2004 2:24 PM
Subject: RE: BCF2000 Review
> Dear Matt,
>
> try to connect as described below (it works here at us):
>
> BCF set to U-4
> BCR set to S-4
> Midi in/outA crosswise
>
> Best regards,
> Bert Niedermeyer
>
>
>
> -----Original Message-----
> From: dancetech [mailto:admin@dancetech.com]
> Sent: Thursday, November 25, 2004 2:07 PM
> To: Niedermeyer, Bert
> Subject: Re: BCF2000 Review
>
>
> yeah but i've already done that, and no luck, there is nothing coming thru
> the BCF to the sequencer, but as i said, the BCF is receiving midi data
from
> the BCR - you can see the indicator lamp on the BCF clearly receiving
midi -
> but it's not passing that data thru to the PC - i have tried the BCF in
both
> U-4 & U-3 mode, & have no luck.
>
> ??
>
> rsvp
>
> Team Dancetech
> London
> --------------------------------------
> www.dancetech.com
> www.7161.com
> --------------------------------------
> FREE music-space & artist/band homepages for all
> --------------------------------------
> www.dancetech.com/aa_dt_new/start/about_dancetech.cfm
> --------------------------------------------------------------------------
--
> -------------------
>
> ----- Original Message -----
> From: "Niedermeyer, Bert"
> To: "'dancetech'"
> Sent: Thursday, November 25, 2004 7:53 AM
> Subject: RE: BCF2000 Review
>
>
> > Dear Matt,
> >
> > the routing of 2 units is explained in the manual. Additional units will
> be
> > wired the same way, cascaded. Please check out the routing in fact for
> each
> > mode. You can find it for example here:
> > http://www.behringer-download.com/BCF2000/BCF2000_templates.pdf
> > http://www.behringer-download.com/BCR2000/BCR2000_templates.pdf
> >
> > Best regards,
> > Bert
> >
> >
> >
> > -----Original Message-----
> > From: dancetech [mailto:admin@dancetech.com]
> > Sent: Wednesday, November 24, 2004 5:23 PM
> > To: Niedermeyer, Bert
> > Subject: Re: BCF2000 Review
> >
> >
> > hi Bert,
> >
> > ok.... i'm moving on now to look at the BCR, and have found another
> > question/problem
> >
> > using 2 BCF's... no matter how i wire-up the BCR & no matter which unit
is
> > set to U4, i cannot get either BCF to pass midi data THRU from the BCR -
> >
> > I always get signal indicator showing the BCF is receiving midi data
from
> > the BCR, but nothing passes thru to the sequencer
> >
> >
> > any clues?
> >
> > rsvp
> >
> > mattc
> >
> >
> > Team Dancetech
> > London
___________________________________
I had an idea for a script once. It's basically Jaws except when the guys in the boat are going after Jaws, they look around and there's an even bigger Jaws. The guys have to team up with Jaws to get Bigger Jaws.... I call it... Big Jaws!!!
Viewing all 2 messages - View by pages of 10: 1
There are 2 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum