 |
 |
 |
 |
 |
 |
 |
Forums - thomann_support
Subject: the t.bone - LC 97 TWS
Viewing all 1 messages - View by pages of 10: 1
Original Message 1/1 22-Nov-14 @ 03:34 PM - the t.bone - LC 97 TWS [Link: the t.bone - LC 97 TWS]
Hi,
we tried to use this microphone for in-door acoustic measurements since the features of the microphone and its cost seem to be in a good balance. A specific powering (+26Volt) and preamp stage has been developed but we acquire the signal we get is very low, even though with no apparent distortions. What is the problem? Maybe the phantom power is not enough? If you want I can send you the circuit scheme of the stage mentioned above.
Thanks in advance for your cooperation.
Best
Stefano
we tried to use this microphone for in-door acoustic measurements since the features of the microphone and its cost seem to be in a good balance. A specific powering (+26Volt) and preamp stage has been developed but we acquire the signal we get is very low, even though with no apparent distortions. What is the problem? Maybe the phantom power is not enough? If you want I can send you the circuit scheme of the stage mentioned above.
Thanks in advance for your cooperation.
Best
Stefano
[This is a question post from a dancetech product page - Replying will send a flag to the person who has added the question.]
Viewing all 1 messages - View by pages of 10: 1
There are 1 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
