No sound from my bass station - Synths & synthesis forums

Forums - Synths & synthesis

Subject: No sound from my bass station

Viewing all 2 messages - View by pages of 10: 1

Original Message 1/2 25-Mar-99 @ 07:35 PM - No sound from my bass station

dr_distorto

Posts:

Link?: No link

File?: No file

Maybe you can help...

I recently borrowed my friends bass station to do some recording. I had
used it before but am very limited in my knowledge of the machine. I
usually pick one of the pre-set numbers and adjust it and if I don't
like it I switch off that number and switch back ( I guess this is the
write protect mode) and start again.

Well this time I was using it and there was a pre-set number that had no
sounds. I turned the knobs and came up with some thing I really liked.
I switch the write protect switch to enable changed a few settings
switched it back to protect. next I switched to another pre-set to see
what other sounds there were and no sound, so I switched to the next no
sound and this happened on all of the channels (pre-sets) and no matter
how many knobs I turn or buttons I switch I can not get it to make any
more sounds.

Help

[ back to forum ] [quote]

Message 2/2 26-Mar-99 @ 01:58 PM - RE: No sound from my bass station

Phill

Posts:

Link?: No link

File?: No file

You accidentially switched the local off...refer to Products/BassStaion/Tech help on this site the answer is there.

Phill@Novation

[ back to forum ] [quote]

Viewing all 2 messages - View by pages of 10: 1

There are 2 total messages for this topic

Reply to Thread

You need to register/login to use the forum.

Click here to Signup or Login !

[you'll be brought right back to this point after signing up]

Back to Forum