 |
 |
 |
 |
 |
 |
 |
Forums - Music techology
Subject: AWE 32 .Midi controlled Cut Off and Resonace
Viewing all 4 messages - View by pages of 10: 1
Original Message 1/4 27-Jul-97 @ 09:50 PM - AWE 32 .Midi controlled Cut Off and Resonace
How can i use data entry on a keyboard
to control cut off and resonance
and record it?
I HAVE done it with AWETOY together with Hubi's
loopback device.
BUT they dont work very well.
There must be a simpler way??
Im using cakewalk audio.
Pete
to control cut off and resonance
and record it?
I HAVE done it with AWETOY together with Hubi's
loopback device.
BUT they dont work very well.
There must be a simpler way??
Im using cakewalk audio.
Pete
Message 2/4 28-Jul-97 @ 01:47 PM - RE: AWE 32 .Midi controlled Cut Off and Resonace
the general midi protocol for resonance & cutoff is numbers 71 & 74........in Cakewalk, go to the midi clip with the data yoy wish to filter, then click on it and select "controllers".........then draw in the resonance setting just once (if you want a fixed resonance, then draw the cut-off curves over the bars you wish to effect....or assign your master keyboard to send out those control numbers from any two sources, such as pedal/slider or mod wheel, and send it in in real-time.........not sure if those are the correct numbers for the awe tho'
Message 3/4 20-Aug-97 @ 09:14 PM - RE: AWE 32 .Midi controlled Cut Off and Resonace
I'm almost done with a "StudioWare" panel in CakeWalk Pro Audio 6.0 specifically for the AWE-32 or AWE-64, that includes all the registers, (LFOs, Rez, Filter, ASDR, etc)
It's really pretty awesome what can be done with such a cheap card.
I have it work already, but I wanted to add some cute graphics, etc. Anyone want beta-test it?
It's really pretty awesome what can be done with such a cheap card.
I have it work already, but I wanted to add some cute graphics, etc. Anyone want beta-test it?
Message 4/4 21-Aug-97 @ 11:50 AM - RE: AWE 32 .Midi controlled Cut Off and Resonace
To modify cutoff/res on the awe, insert the following
in the list view thing of your sequencer:
Controller 99 = 127 (dont know why)
Controller 98 = 22 (Specify you want to control res)
Controller 6 = required resonance value
Controller 38 = required resonance value again
To adjust cutoff it's the same but set controller98=21
To control the cutoff in real time.
(Needs a midi keyboard with assignable mod wheel)
Controller 99-127
Controller 98=22
Controller 6=resonance amount (0-127)
Controller 38=resonance amount (0-127)
Controller 98=21
* Put the controller messages above in the first bar
of your song.
* Assign the mod wheel on your keyboard to 38
* Play the first bit of the song containing the data above
* now when you play notes on the keyboard you can adjust
the filter cutoff with the mod wheel.
**Note you could also draw curves for controller 38.
Hope this helps
Nathan Parton
(no email cos I'm moving house)
in the list view thing of your sequencer:
Controller 99 = 127 (dont know why)
Controller 98 = 22 (Specify you want to control res)
Controller 6 = required resonance value
Controller 38 = required resonance value again
To adjust cutoff it's the same but set controller98=21
To control the cutoff in real time.
(Needs a midi keyboard with assignable mod wheel)
Controller 99-127
Controller 98=22
Controller 6=resonance amount (0-127)
Controller 38=resonance amount (0-127)
Controller 98=21
* Put the controller messages above in the first bar
of your song.
* Assign the mod wheel on your keyboard to 38
* Play the first bit of the song containing the data above
* now when you play notes on the keyboard you can adjust
the filter cutoff with the mod wheel.
**Note you could also draw curves for controller 38.
Hope this helps
Nathan Parton
(no email cos I'm moving house)
Viewing all 4 messages - View by pages of 10: 1
There are 4 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum
