Forums - Synths & synthesis
Subject: Whos got TB303/kenton sockets+Pro2
Original Message 1/11 06-Sep-01 @ 11:32 PM - Whos got TB303/kenton sockets+Pro2
Kenton and a Kenton Pro 2 ? If so, could you please tell me
if you can get the modified 303 to play a single,long,
continuous,sustained,indefinate note. If so,can you tell me
how you have it all set up,as i cant do this function on
mine,and am just wondering if anyone else can.
Ive had a similiar thread going on recently talking about
this, but havent actually managed to speak to someone with
exactly the same setup as me.
I spoke to one chap from Australia,(on the SOS forum)who had
a DevilFish mod,and the Pro 2,and he said he COULD get his
to play a indefinate note,but when i sent mine back down to
Kenton Electronics,they also could'nt get mine to play a
single indefinate/sustained note,except by the way i explain
on my other thread here,(by doubling up the notes ).
Just wondering if its only me,or if all the Kenton
sockets,and Pro 2 users have this phenomena.
Thanks in advance
Message 2/11 07-Sep-01 @ 03:39 PM - RE: Whos got TB303/kenton sockets+Pro2
Can't help you further than that though, sorry.
-M-
Message 3/11 08-Sep-01 @ 07:14 PM - RE: Whos got TB303/kenton sockets+Pro2
Maarten. Also if you could have been botherd to
read my thread below recently,you will have
noticed that Trev reckoned i should be able to
play a continuous/indefinate note,so i was simply
putting up a thread header specifically referring
to my excact setup,and my post is referring only
to the continuous note issue,and not referring to
the Slide issue, as on my last thread.
I thought this is a place where you come for
help,and pass on tips and experiances with other
303 users,and i hope that some people, might at
least now be aware, of this potential issue with
the Kenton kits.
So Maarten,considering you were one of those
people asking about the Kenton kits two threads
ago,i suggest if you havent got anything positive
or constructive to say,don
Message 5/11 10-Sep-01 @ 07:42 AM - RE: Whos got TB303/kenton sockets+Pro2
-M-
Message 6/11 10-Sep-01 @ 05:15 PM - RE: Whos got TB303/kenton sockets+Pro2
"uptight" day at work,(again).All is forgiven.
Still dont know what the "P" represents
though,Piss take
Message 9/11 11-Sep-01 @ 08:32 AM - RE: Whos got TB303/kenton sockets+Pro2
-M-
Message 10/11 11-Sep-01 @ 11:35 PM - RE: Whos got TB303/kenton sockets+Pro2
Any chance of getting back to the thread topic now
? If anybody can be bothered reading through this
dribble,(which i doubt).
Oh well .
...........
Pages: 1 2
There are 11 total messages for this topic
Reply to Thread
You need to register/login to use the forum.
Click here to Signup or Login !
[you'll be brought right back to this point after signing up]
Back to Forum