Behringer XENYX 1832 FX
Category: Products / mixing desks / analog mixers
Added: 05-Jul-06 | Author: admin
New price: 192.50 UKP - 279.00 Euros | S/H price: Not listed
Company Link: Behringer.com
Company Link: BEHRINGER GmbH
Behringer XENYX 1832 FX
BEHRINGER XENYX 1832 FX, 18ch. mixer with 60mm Fader, 6 Mic Inputs with 48 Volt Phantompower and 75 Hz Lowcut, internal 24-bit effect processor, 7-Band main eq, 4 Stereo-Inputs, complete 3 Band EQ with param. EQ, 3 Aux (pre/post) with send fader, USB-plug for direct connection with the PC, Insert per chanal, Peak LED per chanal, Mute per chanal, 2Track In/Out, XLR Main out, 2 subgroups with separate output, internal powersupply, incl. 19" rackmount
Product Manuals or Files
no user manual
Product Resources
Audio demo?
More choices in this product category from other manufacturers:
Category: Products / mixing desks / analog mixers
User Comments
Product: Behringer - XENYX 1832 FX
Name: Andrei Lupu
Email: Email supplied but hidden
Activity: Hobby-ist
Date: 30-Dec-08
Behringer Xenyx 1832 FX mixer - the GAIN knob controlling the input level for MIC and LINE inputs - this function appears not to work correctly as the knob has to be turned to the right, ie it has to be on Full Gain to get any signal from mics to the powered speakers. Anything less and the mics do not work. Also therefore when at full gain, it can sends a distorted signal to powered speakers.Low input volume until the last little twist of the trim pot , all the volume you would have expected to get as the pot was rotated, only in the last two degrees of turn.
Product rating out of 5:  |
Product: Behringer - XENYX 1832 FX
Name: Alex Crosbie
Email: Email supplied but hidden
Activity: part-timer
Date: 08-Oct-10
I have the same problem 'is it faulty can it be fixed ?
Product rating out of 5:  |
Last added comment
Product: Behringer - XENYX 1832 FX
Name: John
Email: Email supplied but hidden
www.radiorwb.co.uk
Activity: Hobby-ist
Date: 27-Mar-11
No way can that be right. The gain control is very sensitive. I use radio mics and an sm58 into the balanced xlr inputs and the gain in only at 2-3 on the dial with plenty on volume via the fader. Perhaps you are using the unbalanced 1/4 inch jack inputs?
Product rating out of 5:  |
'Behringer XENYX 1832 FX'
Looking for the manual? - Check this page above under the heading: 'Product manual or files' - We might have it!
Note: To cut down on spammers, cookies must be enabled to post comments to this page.
Looking for the manual? - Check this page above under the heading: 'Product manual or files' - We might have it!
[back to top]
Total stars: 13 | Total votes: 4
Buy this item for:
Sorry - This item is no longer available via Dancetech shop.
Quantity: |
132 other
products from
Behringer
Thomann deals
